Pentax 19321 Operating Manual Download Page 79

Page: 79 / 212

aking

Pictu

res

Recorded pixels and the maximum zoom ratio

Recorded

pixels

Intelligent Zoom

Digital Zoom

Not Available (7× optical zoom available)

Equivalent to approx.

35.7×

Approx. 8.1×

Approx. 8.8×

Approx. 9.9×

Approx. 11.2×

1024

Approx. 22.3×

640

Approx. 35.7× (Same as 35.7×

Digital

Zoom)

• You are recommended to use a tripod to prevent camera shake when

taking pictures at a high magnification rate.

• Pictures taken in the digital zoom range appear grainier than pictures

taken in the optical zoom range.

• If you use the optical zoom when shooting with

, the sound of the

lens moving may be audible in the recorded sound, depending on the
shooting environment.

• Intelligent Zoom is not available under the following conditions.

- When Digital Zoom is set to Off.
- When the recorded pixels is 8M. (7x optical zoom available)
- In

mode

• The image enlarged using Intelligent Zoom may appear rough on the

LCD monitor. This does not affect the quality of image.

• Only the Digital Zoom is available in

mode. Set Movie SR to Off in

[

Rec.Mode] menu to use the Digital Zoom in Movie mode. (p.113)

Summary of Contents for 19321





















































































































































































































Search results

Summary of Contents for 19321

Reviews:

Related manuals for 19321

Brands by name

Popular brands

Pentax 19321, Operating Manual

Search results

Summary of Contents for 19321

Reviews:

Related manuals for 19321

Brands by name

Popular brands