manualshive.com logo in svg

Pentax 19091, Operating Manual, Page: 50 / 240

Share
Download
Pentax 19091 Operating Manual Download Page 50

48

2

G

etting

 Started

Inserting/Removing the SD Memory 

Card

Captured images are recorded on the SD Memory Card. Make sure the 

camera is turned off before inserting or removing the SD Memory Card 

(market product).

1

Lift the card cover unlock lever 
(

1

) and turn it towards OPEN 

(

2

).

The card cover opens.

2

Insert the card all the way with 
the SD Memory Card label 
toward the LCD monitor.

Push the SD Memory Card in once to 
remove.

3

Close the card cover.

• Do not remove the SD Memory Card while card access lamp is lit.
• Use this camera to format (initialize) an SD Memory Card that is unused or 

has been formatted and used on other cameras or digital devices. Refer to 

“Formatting the SD Memory Card” (p.188) for details on formatting.

Be sure to fully close the card cover. The 
camera will not turn on if the card cover 
is open.

1

2

Summary of Contents for 19091

















































































































































































































































Reviews:

No comments