Composing Your Shot
47
3
Tak
ing P
icture
s
You can take pictures using any of the seven decorative frames stored in the
camera.
1
In Capture mode, touch the LCD monitor.
The [Capture Toolbar] appears.
2
Touch the
A
(Shooting Mode)
icon.
•
The icon of the currently selected shooting
mode appears in place of the
A
icon.
•
The [Capture Palette] appears.
3
Double-touch the
Y
icon.
•
The Frame Selection screen appears.
•
To bring up the guide display, single-touch
the icon.
4
Touch the arrow icons (
qr
) to
choose the frame you want to use,
and touch [OK].
•
The setting is saved and the camera returns to Capture mode.
5
Press the shutter release button halfway.
The focus frame on the LCD monitor turns green if the subject is in focus.
6
Press the shutter release button fully.
The picture is taken.
Memo
•
The frames used in this function are stored in the camera’s built-in memory.
They can be replaced with different frames that can be copied from an SD
Memory Card by touching [Change] on the Frame Selection screen (p.100).
•
The number of recorded pixels is fixed at
h
.
•
If the number of recorded pixels is other than
h
before using this function
and you change the shooting mode, the setting for the image size returns to
the previous value.
Taking Pictures with the Built-in Photo Frames
Capture Palette
Capture Palette
Capture Palette
Select the frame
Select the frame
for composite
for composite
Change
OK
Select the frame
for composite
Summary of Contents for 18941 - Optio T10 Digital Camera
Page 149: ...147 Memo ...
Page 162: ...Memo ...
