155
5
F
uncti
on Re
ferenc
e
With the AF360FGZ, you can discharge the flash to take a picture at a
shutter speed faster than 1/180 second. High-speed flash sync can be
used with the flash attached to the camera, or wireless.
Attaching and Using the AF360FGZ on the Camera
1 Remove the hot shoe cover and attach the AF360FGZ.
2 Turn the mode dial and set the exposure mode to
a
.
3 Turn on the AF360FGZ.
4 Set the AF360FGZ sync mode to HS
b
(high-speed flash sync.).
5 Confirm that the AF360FGZ is fully charged and then take the picture.
Shoot using the flash without connecting the camera and flash with a cord
by using two AF360FGZ units.The High-speed sync mode is also available
in wireless mode.
Using High-Speed Flash Sync Mode
• The
b
will light in the viewfinder when the flash is ready (fully charged).
• High-speed flash sync is only available when the shutter speed is faster than
1/180 sec.
• High-speed flash sync is not available when the exposure mode is set to
p
(Bulb).
Using in Wireless Mode
Be sure to set the two AF360FGZ units to the same channel. See the
AF360FGZ operating manual for details.