Pentax 17851 - Optio P80 Digital Camera, Operating Manual

Page: 117 / 260

115
3
Ta
king
Pict
ures
This specifies whether Blink Detection function works when you use the
Face Recognition function. The default setting is
O
(On).
1
Press the 3 button in
A
mode.
The [ A Rec. Mode] menu appears.
2
Use the four-way controller (
23
) to select [Blink
Detection].
3
Use the four-way controller (
45
)
to select
O
or
P
.
O Blink Detection function works.
P
Blink Detection function does not
work.
The setting is saved.
4
Press the 3 button.
The camera returns to capture status.
• When the sensitivity is set to 3200 or 6400, the number of recorded
pixels is fixed at
f
(2592×1944).
• When set to
9
(Green) or
C
(Movie) mode, only Auto (sensitivity 64
- 800) is available.
• When set to
c
(Digital SR) mode, only Auto (sensitivity 64 - 6400) is
available.
• When set to
S
(Fireworks) mode, the sensitivity is fixed at its
minimum setting.
• If you change the [Sensitivity] setting frequently, you can save time by
assigning it to the Green button (p.121).
Saving the Sensitivity setting
1
p.127
Setting Blink Detection
Blink Detection
1
p.69
Rec. Mode
Instant Review
MENU Exit
2 / 4
Movie
D-Range Setting
Blink Detection
Digital Zoom
EV Compensation
0.0