Pentax 17731 Operating Manual Download Page 35

Page: 35 / 280

Getting Started

Powering the Camera

Use the supplied battery charger (D-BC78) to charge the supplied rechargeable

lithium-ion battery (D-LI78) before using it in the camera for the first time or after

a long period of non-use, or when the [Battery depleted] message appears.

Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord,

rated 125 V, 7A, minimum 6 ft (1.8 m)”

Connect the AC plug cord to the battery charger.

Plug the AC plug cord into the power outlet.

Place the battery in the battery charger so that the

PENTAX logo is facing up.

The charging indicator turns on while charging.
When charging is finished, the charging indicator turns off.

Remove the battery from the battery charger when

charging is finished.

Charging the Battery

• Do not charge batteries other than the rechargeable lithium ion D-LI78

battery using the supplied D-BC78 battery charger. Doing otherwise
may cause damage or overheating.

• The battery has reached the end of its service life when it starts to run

down soon after being charged. Replace it with a new battery.

• If the battery is inserted correctly but the charging indicator fails to

light, the battery may be faulty. Replace it with a new battery.

Battery charger

Charging indicator
While charging: Lights
Charging finished: Turns off

Battery

AC plug

cord

To power

outlet

Summary of Contents for 17731

























































































































































































































































































Search results

Summary of Contents for 17731

Reviews:

Related manuals for 17731

Brands by name

Popular brands

Pentax 17731, Operating Manual

Search results

Summary of Contents for 17731

Reviews:

Related manuals for 17731

Brands by name

Popular brands