Pentax 17731, Operating Manual

Page: 126 / 280

124
3
Ta
king
Pi
ct
ures
In this mode, a set number of pictures can be taken automatically at a
set interval from a set time.
1
Press the 3 button in A mode.
The [
A
Rec. Mode] menu appears.
2
Use the four-way controller (
23
)
to select [Interval Shoot].
3
Press the four-way controller ( 5 ).
The [Interval Shoot] setting screen appears. [Interval] is marked with
the frame.
4
Set the interval.
1 Press the four-way controller (
5
).
2 Use the four-way controller (
23
) to
set the minutes, then press the four-
way controller (
5 ).
3 Use the four-way controller (
23
) to
set the seconds, then press the four-
way controller (
5
).
The setting is saved, and the frame returns to [Interval].
Setting the Interval Shooting
Interval 10 sec. – 99 min.
Set the camera to take pictures at intervals.
The intervals can be set in increments of one
second from ten seconds to four minutes, or in
one-minute increments from four to 99
minutes. You cannot set the camera to take
interval shots for less than ten seconds.
Number of
Shots 2 shots – number of
recordable images You can set this to up to 1000 shots. However, it
cannot exceed the number of recordable images.
Start Delay 0 min. – 24 hours
You can set one minute increments for the first 59
minutes and one hour increments from there. If the
start time is set to 0 minutes, the first picture is taken
as soon as the shutter release button is pressed.
Rec. Mode
MENU
Exit
3 / 4
Memory
Green Button
Blink Detection
Digital Zoom
Instant Review
Interval Shoot
Interval Shoot
MENU
Interval 0min. 10sec.
Number of Shots 2
Start Delay 0hr. 0min.