Pentax 17731 Operating Manual Download Page 121

Page: 121 / 280

119

Ta
king
Pi
ct

ures

You can select the sensitivity to suit the brightness of the surroundings.

Press the

button in

mode.

The [

Rec. Mode] menu appears.

Use the four-way controller (

) to select [Sensitivity].

Press the four-way controller (

A pull-down menu appears.

Use the four-way controller (

)

to change the sensitivity.

Press the

button.

The setting is saved.

Press the

button.

The camera returns to capture mode.

Setting the Sensitivity

AUTO

The sensitivity is automatically adjusted by the camera. (Sensitivity 64-
800)

The lower the sensitivity, the less noise that affects the image. The
shutter speed will be slower in low light conditions.

100
200
400
800

1600

Higher sensitivity settings use faster shutter speeds in low light
conditions to reduce camera shake, but the image may be affected
by noise.

3200
6400

400

AUTO
64
100
200

MENU

2 / 4

Rec. Mode

Cancel

Sensitivity

AE Metering

ISO Corction in AUTO

Movie
D-Range Setting

EV Compensation

Summary of Contents for 17731

























































































































































































































































































Search results

Summary of Contents for 17731

Reviews:

Related manuals for 17731

Brands by name

Popular brands

Pentax 17731, Operating Manual

Search results

Summary of Contents for 17731

Reviews:

Related manuals for 17731

Brands by name

Popular brands