Pentax 17731 Operating Manual Download Page 109

Page: 109 / 280

107

Ta
king
Pi
ct

ures

Press the

button.

The focus is fixed and the camera returns to capture mode.
After the focus is fixed, you can press the four-way controller (

) again

to display the

indicator and readjust the focus.

You can set the autofocus area and focusing method.

Press the

button in

mode.

The [

Rec. Mode] menu appears.

Use the four-way controller (

)

to select

Setting.

Press the four-way controller (

The [AF Setting] screen appears.

The shooting mode and drive mode cannot be changed while the

indicator is displayed.

To switch from

to another focus mode, press the four-way controller

(

) while the

indicator is displayed.

Selecting the Autofocus Settings

Rec. Mode

MENU

Exit

1 / 4

Recorded Pixels
Quality Level

White Balance

AWB

12M

Pixel Track SR

Image Tone

Bright

AF Setting

Summary of Contents for 17731

























































































































































































































































































Search results

Summary of Contents for 17731

Reviews:

Related manuals for 17731

Brands by name

Popular brands

Pentax 17731, Operating Manual

Search results

Summary of Contents for 17731

Reviews:

Related manuals for 17731

Brands by name

Popular brands