Pentax 17491 Operating Manual Download

Page: 30 / 272

Gett

ing Started

Attaching the Lens Cap and Strap

Attach the lens cap (O-LC92) and strap (O-ST92) supplied with the camera.

Attach the string
provided to the lens cap.

Pass the end of the strap through the strap lug, then
secure it on the inside of the clasp.

As shown in the bottom-left illustration, passing the strap through the lens
cap's string prevents the lens cap from being lost.

Pass the other end of the strap through the other strap
lug on the camera, then secure it on the inside of the
clasp (bottom-right illustration).

e_kb484.book Page 28 Wednesday, March 18, 2009 5:23 PM

Summary of Contents for 17491

















































































































































































































































































Search results

Summary of Contents for 17491

Reviews:

Related manuals for 17491

Brands by name

Popular brands

Pentax 17491, Operating Manual

Search results

Summary of Contents for 17491

Reviews:

Related manuals for 17491

Brands by name

Popular brands