Pentax 17491 Operating Manual Download

Page: 104 / 272

102

Ta
kin

Pictur

Press the shutter release button fully.

Press the shutter release button once to automatically adjust the
exposure and take the three pictures at different exposures.

(Digital Wide) mode, you can stitch two captured images into a

single frame up to approx. 20mm coverage (35mm film equivalent).

mode, set the mode dial to

and press the four-

way controller (

The Capture Mode Palette appears.

• When the Instant Review is set to on (p.135), the third picture taken is

shown in Instant Review after shooting (p.67).

• Auto Bracket is unavailable in

(Movie),

(Green),

(Fireworks),

(Digital Panorama) and

(Digital Wide) modes.

Using the Digital Wide Function (Digital Wide Mode)

Shutter release button

Four-way controller

button

e_kb484.book Page 102 Wednesday, March 18, 2009 5:23 PM

Summary of Contents for 17491

















































































































































































































































































Search results

Summary of Contents for 17491

Reviews:

Related manuals for 17491

Brands by name

Popular brands

Pentax 17491, Operating Manual

Search results

Summary of Contents for 17491

Reviews:

Related manuals for 17491

Brands by name

Popular brands