Pentax 17311 Operating Manual Download Page 75

Page: 75 / 280

asi
c Op

ati
o

You can delete one image at a time.

Press the

button and use the four-way controller (

)

to select an image to delete.

Press the

button.

The Delete screen appears.

Use the four-way controller (

)

to select [Delete].

Select a file format to delete for images
saved in RAW+ format.

Press the

button.

The image is deleted.

Deleting Images

• Deleted images cannot be restored.
• Protected images cannot be deleted.

Delete JPEG

Deletes only the JPEG
image.

Delete RAW

Deletes only the RAW
image.

Delete
RAW+JPEG

Deletes both file formats.

When deleting multiple images at once, refer to “Deleting Multiple Images”
(p.180).

Cancel

Delete

100-0046

Summary of Contents for 17311

























































































































































































































































































Search results

Summary of Contents for 17311

Reviews:

Related manuals for 17311

Brands by name

Popular brands

Pentax 17311, Operating Manual

Search results

Summary of Contents for 17311

Reviews:

Related manuals for 17311

Brands by name

Popular brands