Pentax 17231 - Optio W60 - Digital Camera Operating Manual Download

Page: 45 / 244

Qu
ick Star

Quick Start

Taking Still Pictures

The standard procedure for taking still pictures is described below. The
flash fires automatically depending on the light conditions.

Press the power switch.

The camera turns on and is ready to take
still pictures. In this manual, this is called
Still Picture Capture mode.

Confirm the subject and shooting
information on the display.

The focus frame in the middle of the display
indicates the zone of automatic focusing.
You can change the captured area by pressing the Zoom/

button

to the left or right.

: enlarges the subject

: widens the area that is captured by the camera

Press the shutter release button halfway.

The focus frame on the display turns green if the subject is in focus.

Press the shutter release button fully.

The picture is taken.
The image appears on the display for one second (Instant Review) and
is saved to the SD Memory Card or built-in memory. (p.44)

Press the Green button to switch to the

(Green) mode and let the

camera set all the shooting functions automatically. (p.66)

Power switch

Shutter release button

Zoom/

button

1 4 : 2 5

3 8

0 7 / 0 7 / 2 0 0 8

Focus frame

Summary of Contents for 17231 - Optio W60 - Digital Camera





















































































































































































































































Search results

Summary of Contents for 17231 - Optio W60 - Digital Camera

Reviews:

Related manuals for 17231 - Optio W60 - Digital Camera

Brands by name

Popular brands

Pentax 17231 - Optio W60 - Digital Camera, Operating Manual

Search results

Summary of Contents for 17231 - Optio W60 - Digital Camera

Reviews:

Related manuals for 17231 - Optio W60 - Digital Camera

Brands by name

Popular brands