Pentax 17231 - Optio W60 - Digital Camera, Operating Manual, Page: 103 / 244

101
4
Tak
ing Pi
cture
s
The procedure for setting the focus manually ( \ ) is described below.
1
Press the four-way controller (
5
)
in
A
mode.
2
Use the four-way controller (
5
) to
select \ and press the 4 button.
The central portion of the image is
magnified to fill the screen of the display
when focusing.
3
Press the four-way controller (
23
).
The \ indicator appears on the display to
indicate the approximate distance to the
subject. Use the four-way controller ( 23 ) to
adjust the focus using the indicator as a
guide.
2
: for distant focus
3
: for closer focus
4
Press the
4
button.
The focus is fixed and the camera returns to capture status.
In addition, the focus position is fixed one minute after you remove
your finger from the four-way controller (
5
).
After the focus is fixed, you can press the four-way controller (
5
) again
to display the
\
bar and readjust the focus.
• In
9
(Green) mode, you can only select = ,
q
or
3
.
• is unavailable in (Digital Wide) mode.
• The noise from focusing is recorded when a focus mode other than
3
or s is selected in C and modes.
• When = is selected and the focus limiter is set to
P
(Off) (p.116),
if the subject is closer than 50 cm, the camera automatically focuses
from 10 cm (Auto-Macro function).
• When shooting with q selected, if the subject is further than 60 cm
away, the camera automatically focuses to infinity.
Saving the Focus Mode
1
p.128
Manual Focus
To switch from \ to another focus mode, press the four-way
controller (
5
) while the
\
bar is displayed.
Capture mode and drive mode cannot be changed while the
\
bar
is displayed.
OK OK OK OK Cancel Cancel Cancel MENU
Focus Mode Focus Mode
Manual Focus Manual Focus
Focus Mode
Manual Focus
2m 2m 2m
0.5 0.5
0.5
1 1
MENU OK OK OK OK
\ indicator