Pentax 17216 - Optio E50 Digital Camera Operating Manual Download Page 36

Page: 36 / 159

Qu
ick Star

You can rotate the displayed image. This is useful when you view
images taken vertically.

Press the

button after taking a picture.

The image appears on the LCD monitor.

Press the four-way controller (

The Playback Mode Palette appears.

Use the four-way controller

(

2345

) to select

(Image

Rotation) and press the

button.

The rotation selection screen (0°, Right 90°,
Left 90°, or 180°) appears.

Use the four-way controller (

2345

) to choose the

rotation direction and press the

button.

The rotated image appears.

Rotating the Displayed Image

Panoramic pictures, images taken with the 16-frame shooting
function, and movies cannot be rotated.

Protected images can be rotated, but they cannot be saved in the
rotated state.

button

Four-way controller

button

Shutter release button

O K

MENU

C a n c e l

O K

Summary of Contents for 17216 - Optio E50 Digital Camera
































































































































































Search results

Summary of Contents for 17216 - Optio E50 Digital Camera

Reviews:

Pentax 17216 - Optio E50 Digital Camera, Operating Manual, Page: 36 / 159

Search results

Summary of Contents for 17216 - Optio E50 Digital Camera

Reviews: