Pentax 15936, Operating Manual

Page: 167 / 225

165
7
Se
ttings
You can adjust the volume of operation sounds and change the type of
sound.
1
Press the 3 button in
Q
mode.
The [
W
Setting] menu appears.
2
Use the four-way controller ( 23 ) to select [Sound].
3
Press the four-way controller (
5
).
The [Sound] screen appears.
Subsequent steps vary depending on your
selection.
4
Use the four-way controller (
23
) to select [Operation
Volume].
5
Use the four-way controller (
45
) to adjust the volume.
Set the volume to
f
to mute the start-up sound, shutter sound,
operation sound, and self-timer sound.
6
Change [Playback Volume] in the same way as in Steps
4 and 5.
4
Use the four-way controller (
23
) to select [Start-up
Sound].
5
Press the four-way controller ( 5 ).
A pull-down menu appears.
6
Use the four-way controller (
23
) to select the sound type.
Choose from [1], [2], [3] or [Off].
Changing the Sound Settings
To Change the Operation Volume/Playback Volume
To Change the Sound Type
S o u n d
Operation Volume
S t a r t - u p S o u n d
S h u t t e r S o u n d
O p e r a t i o n S o u n d
S e l f - t i m e r S o u n d
MENU
P l a y b a c k Vo l u m e
1
1
1
1