80
B
asic
O
p
er
at
ions
3
3
Push down on the portion
indicated in the illustration to
retract the built-in flash.
Using Red-eye Reduction Flash
“Red-eye” is the phenomenon where eyes look reddish in
photographs taken in dark environments with a flash. This is caused
by the reflection of the electronic flash in the retina of the eye.
Red-eye occurs because pupils are dilated in dark environments.
This phenomenon cannot be averted but the following measures can
be used to combat it.
• Brighten the surroundings when shooting.
• Set to wide angle and move closer to the subject if a zoom lens
is in use.
• Use a flash that supports red-eye reduction.
• Position the flash as far away from the camera as possible when
using an external flash.
The red-eye reduction function on this camera reduces a red-eye
effect by discharging the flash twice. With the red-eye reduction
function, the pre-flash is discharged just before the shutter is
released. This reduces pupil dilation. The main flash is then
discharged while the pupils are smaller, reducing the red-eye effect.
To use the red-eye reduction function, select
D
in
B
mode, or
F
or
H
in other modes.
Summary of Contents for 14748
