Pentax 14748, Operating Manual

Page: 301 / 383

299
Chang
ing A
d
ditio
n
al Setting
s
9
This camera is equipped with an electronic level for detecting whether the
camera is level, as indicated on the bar graph in the viewfinder and on the
LCD panel and monitor. Select whether to display the bar graph.
1
Select [Electronic Level] in the [
A
Rec. Mode 4] menu.
2
Use the four-way controller
(
45
) to select
O
or
P
.
3
Press the 3 button.
The screen that was displayed before selecting the menu appears again.
Setting the Electronic Level Display
O
Displays the bar graph of the
electronic level.
P
Does not display the bar graph of the
electronic level. (default setting)
The bar graph can be displayed on the monitor when the
M
button is
pressed in the control panel. When [Electronic Level] is assigned to the | /
Y
button (p.285), press the | /
Y
button while the status screen or Live
View is displayed to display the electronic level. (p.168)
Movie
Live View
Electronic Level
Horizon Correction
Shake Reduction
Input Focal Length
35mm
1 2 3 4 5
Exit MENU