Pentax 14748, Operating Manual

Page: 102 / 383

100
Sho
o
ting
Func
tion
s
4
3
Press the 3 button.
The camera is ready to take a picture.
This camera features the following nine exposure modes. Use the mode
dial to change the exposure mode. (p.45)
The settings available for each exposure mode are as follows.
(
z
: Available
×
: Not available)
Auto
Determines conditions such as shutter speed, sensitivity, and
internal temperature, and automatically applies Noise
Reduction as necessary. (default setting)
On
Applies Noise Reduction when the exposure time is longer than 1
second.
Off Does not apply Noise Reduction.
• Processing may take a while when shooting with Slow Shutter Speed NR set
to [On]. Pictures cannot be taken while an image is being processed.
• When the Noise Reduction function is activated, [ nr ] blinks on the LCD panel
and in the viewfinder where the aperture value is normally displayed, and a
countdown of processing time is displayed where the shutter speed is
normally displayed.
Changing the Exposure Mode
Exposure
Mode
Characteristics
EV
Compen-
sation
Change
Shutter
Speed
Change
Aperture
Value
Change
Sensi-
tivity
Page
B
Green
Lets you capture images
with fully automatic settings.
× × × × p.103
e
Hyper-
program
Automatically sets the
shutter speed and aperture
value to obtain a proper
exposure according to
Program Line when taking
pictures. You can use the
front and rear e-dials to
switch between shutter
priority and aperture priority.
z z z z
p.104