Pentair SIATA V132-SFE-EV-VIRIDION, Installer Manual

Page: 66 / 110

Installer Manual Siata V132-SFE-EV-VIRIDION - Programming
66 / 110 Ref. MKT-IM-009 / C - 08.06.2018
* Parameters repeated for the last 3 recorded regenerations, each of those is indicated by progressive sectors of the circle
icon.
6.5.1. Resetting the statistics
The statistic may be deleted in the statistics menu.
A Open the Statistics menu.
→ See 6.5. Statistics, page 65.
B Press and hold for 5 seconds.
9*
A xx
05 Automatic regeneration launched in volume mode (SH:02).
06
Automatic regeneration launched in volume mode (SH:02) because maximum
number of days for obligatory regeneration has been reached.
07 -
08 Automatic regeneration launched in interval mode (SH:03).
09 Automatic regeneration launched in time clock mode (SH:04).
S xx
01 Regeneration started instantaneously by remote start.
02 Regeneration started at programmed time by remote delayed start.
xx Number of days elapsed since the previous regeneration.
Dnxx Elapsed days since last signal from the meter was received.
Exxx Percentage of water saving performed.
Xxxx Conductivity during phase 1.
Xxxx Conductivity during phase 2.
T2xx Elapsed time to read conductivity in phase 2.
Xxxx Phase and time in which regeneration was skipped.
Xxxx Conductivity level for what washing phase was ended.
Alxx
NOAL No alarm.
AL01 Salt quantity too low during phase 2.
AL02 Sensor disconnected during the regeneration.
AL03 Sensor presence alarm.
AL04 Conductivity not properly restored after regeneration.
AL05 Hardware reset occurred during the regeneration.
AL06 Regeneration stopped manually.
10 U 1-7
Water consumption average (m
3
or L) for each day (evaluated considering the
last 4 weeks).
11 rExxxxxx
Reserve for the current day in m
3
or L.
12 AAA.Y Software version and revision.
Data Description