manualshive.com logo in svg

Pentair Riversoft, Installer Manual

Share
Download
Pentair Riversoft Installer Manual Download Page 44

Installer Manual Riversoft - Programming 

44 / 90

Ref. MKT-IM-045 / A - 13.03.2020

5.

Programming

NOTE

Menus are displayed in a defined and incremental order.

NOTE

After 5 seconds without keypad input, the unit returns to normal operation mode and display 
the time of day.

NOTE

Memory retention in case of power failure : the controller stores the time of day without 
battery in case of power failure. All others programmed parameters are stored in the non-
volatile (Novram) memory and are stored during power failure. The storage time in the flash

 

memory is about 99 years.

5.1. Display

1. 

Digits

Two digits used to display the time, program value or error codes.

2. 

Flow indicator

The flow indicator blinks ON and OFF when water flow turns the meter.

3. 

Delayed regeneration 
indicator

When this dot is displayed, it means that a delayed regeneration is 
programmed.

Summary of Contents for Riversoft



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands