3
Programming the Controller
42
EN-RaychemHWATECOcontroller-IM-H57340 03/13
cycle, Maintain temperature, Economy temperature,
or Off. See “Chapter 6, Heat-Up Cycle Graphs” for
more information.
Edit pre-defined programs
To edit a program, switch Lock to Off. If password
protected, you will need to enter the password to
unlock the controller. After you enter the password,
the controller remains unlocked until five minutes of
key inactivity or the Lock ‘On’ is selected again
Select temperature
Use the up/down arrows to select the temperature:
= Maintain temperature
= Heat-up cycle
= Economy temperature
= Off
Figure 20: Timer block options
Select time block
Use the left/right arrows to select the time block.
Timer programming example from 00:00 to 08:00:
