3
Programming the Controller
32
EN-RaychemHWATECOcontroller-IM-H57340 03/13
indicate that the controller is unlocked. If you wish
to lock (password protect) the controller, see section
3.3.2.6 for instructions.
Displaying Maintain Temperature Setpoint
After finishing the Quickstart, the display will show
the date, time, temperature mode and a star to indi-
cate that the controller is unlocked.
02-11-2013
Maintain
09:13
While in operating mode, press ESC to view a bar
graph that shows the maintain temperature setpoint.
To enter the programming menu, press any other
key. The controller will exit the menu automatically
after five seconds of key inactivity.
Figure 19: Bar graph
Displaying Pipe Temperature
When the optional pipe temperature sensor is con-
nected, the controller will display date and time as
above and alternate between temperature mode and
pipe temperature.
