3
Programming the Controller
29
EN-RaychemHWATECOcontroller-IM-H57340 03/13
Cable type
Use the up/down arrows to select HWAT-Y2 or
HWAT-R2 cable used in your installation. Press
Enter.
Voltage
Use the up/down arrows to select 208 V or 240 V
(applied voltage to the cable). Press Enter.
Units
Use the up/down arrows to select English or Metric
units. Press Enter.
Ambient temperature
The ambient temperature is the air temperature
surrounding the hot water piping where the heating
cable is installed. Use the up/down arrow keys to
select from 60˚F (15˚C) to 80˚F (25˚C). Press Enter.
If your design requires that the ambient temperature
is significantly different from one location to another,
you will need an HWAT-ECO controller for each ambi-
ent condition.
Maintain temperature
The maintain temperature setpoint is the water tem-
perature that you set for normal use. Use the up/
down arrow keys to select the temperature.
