Installer manual Fleck 5800 XTR - Maintenance
Ref. MKT-IM-006 / E - 12.11.2019
107 / 126
9.4.9
Optical sensor replacement
1. Remove the controller, see Controller replacement [
2. Disconnect the wire from the motor to the optical sensor (
4
).
3. Release the optical sensor support (
1
) by pushing it back and up as shown.
4. Release the optical sensor (
3
) from its support (
1
) by pressing the clips (
2
).
5. Change the optical sensor (
3
).
6. Reverse above procedure steps to rebuild.
