Installer manual Fleck 5800 XTR - Maintenance
Ref. MKT-IM-006 / E - 12.11.2019
105 / 126
9.4.7
BLFC cleaning
1. Using a wrench, remove the BLFC holder (
1
).
2. Using pliers, remove the grid (
4
) from BLFC holder (
1
).
3. Remove the BLFC (
3
) from the grid (
4
).
4. Clean with a terry cloth.or change the BLFC (
3
) and the seal (
2
).
5. Clean the grid (
4
).
6. Lubricate the seal (
2
) with approved lubricant only.
Caution - material
Risk of damage due to wrong lubricant use !
Do not use petroleum-based lubricants such as Vaseline, oils, or hydrocarbon-
basedlubricants.
Do not use silicon grease.
Use only P-80
®
Emulsion lubricant (water based lubricant) !
7. Reverse above procedure steps to rebuild.
