Pentair FLECK 5800 SXT, Installation

Page: 1 / 3

www.h2ofilters.ca
AC adapter plugs in
here. You may need
to remove the cover
to locate the hole.
FLECK 5800 SXT WATER
SOFTENER INSTALLATION
Step 1. Loosen the metal clips (similar to #3 in Figure 5) with a flat screwdriver or ¼” nut driver, Insert
the bypass valve firmly into the back of the valve head and screw the metal clips back in to hold the
bypass valve in place. The arrows on the top of the bypass valve should be visible from the top. Do
not install the yoke (#2 in Figure 5) yet.
Figure 1 Front View
Figure 2 Side View
Figure 3 Top View
Connect black brine
tube here.
Connect drain
tube here.