Installer Manual Fleck 4600 - MECH - Maintenance
64 / 88
Ref. MKT-IM-027 / B - 01.06.2018
9.2.7. Injector cleaning
No.
Operation
A
Using a flat screwdriver or a 8 mm wrench, remove the screws (
6
).
B
Remove the cap injector (
5
).
C
Remove the seal (
4
).
D
Remove the filter (
2
).
E
Using a flat screwdriver, remove the injector nozzle (
3
).
F
Using a flat screwdriver, remove the injector throat (
1
).
G
Clean or change the injector throat (
1
), the injector nozzle (
3
), the filter (
2
) and the seal (
4
).
H
Lubricate all seals with approved lubricant only.
I
Reverse above procedure steps to rebuild.
