Pentair FLECK 3150 NXT, Installer Manual

Page: 108 / 182

Installer manual Fleck 3150 NXT/NXT2 - Programming
108 / 182 Ref. MKT-IM-010 / C - 18.10.2019
a) Enable lock window with and ;
ð Default setting: off;
b) Press to validate the selection and advance to the
next parameter.
c) Set lock start time with and ;
d) Press to validate the selection and advance to the
next parameter;
e) Set lock end time with and ;
f) Press to validate the selection and advance to the
next parameter.
Lock window #2
activated.
Lock window #2 starts at
13:00.
Lock window #2 ends at
14:00.
6.2.5.25 Programming regeneration cycles time
Set the regeneration cycles duration in minutes.
Info
A maximum of 5 cycles can be programmed.
Info
For filter system only backwash and rapid rinse are available.
Info
The sequence of the regeneration cycles depends upon regenerant flow, see System
regeneration cycle [
} Page 20].