Installer Manual Performa 263-268 / LOGIX 740-760 - Programming
Ref. MKT-IM-011 / A - 15.06.2017
37 / 64
6.4.2. Diagnostic
To access diagnostic values, press and hold
and
for 5 seconds to view the "H" levels.
Note
Diagnostic code H2 to H13 are only available on 760 controller.
6.4.3. Resetting the controller
Caution
Resetting the controller will delete all information stored in its memory, except the time and
day. This will require you to reprogram the controller completely from the initial power-up
mode.
To reset the controller:
A
Press and hold
and
for 5 seconds.
→ H0 and the system’s set resin volume (or “F” mode) will be displayed.
B
If a history value other the “H0” is displayed, use
to scroll through the settings until “H0” is
displayed.
C
To reset the controller, press and hold
for 5 seconds.
→ The controller will be reset to an unprogrammed state.
D
Go to Chapter 6. Programming, page 30 to reprogram the controller.
Diagnostic
Code
Description
Unit
Range
H0
Resin volume
l
/
H1
Day since last regeneration
l/min
0 - 255
H2
Current flow rate
Days
0 - 177
H3
Water used today (since time of regeneration)
l/min
0 - 6553.6
H4
Water used since last regeneration
m
3
0 - 6553.6
H5
Total water used (less significant digit)
m
3
0 - 9999
H6
Total water used (most significant digit)
m
3
0 - 4264 x10
4
H7
Average usage for Sunday
m
3
0 - 6553.6
H8
Average usage for Monday
m
3
0 - 6553.6
H9
Average usage for Tuesday
m
3
0 - 6553.6
H10
Average usage for Wednesday
m
3
0 - 6553.6
H11
Average usage for Thursday
m
3
0 - 6553.6
H12
Average usage for Friday
m
3
0 - 6553.6
H13
Average usage for Saturday
m
3
0 - 6553.6
A
A
