11
Kreepy Krauly
®
Platinum
™
Installation and User’s Guide
Section 3
Operation and Maintenance
Connecting/Disconnecting the Kreepy Krauly
®
Platinum
™
To connect, turn off booster pump and pool pump. Twist lock the Wall Fitting clockwise
into the Wall Adapter. To disconnect, unlock and twist Wall Fitting counter clockwise.
The Wall Adapter should remain in the pool wall.
Turning On/Off the Kreepy Krauly
®
Platinum
™
The Kreepy Krauly
®
Platinum
™
operates off the booster pump coming from the equipment
pad, and can be turned on or off by merely turning on/off your booster pump time clock.
Cleaning the Sand & Silt Bag
1. Carefully unlock the debris bag from the vacuum
tube. Use your thumb to push the “U” shaped
snap lock closure upward until it snaps open.
Make sure to swing it away from the opening.
2. Open the bag and remove debris.
3. To close, push the middle of bag inward, as
shown, and bring the edges together to make
them stack like an accordion.
4. Swing the “U” shaped snap lock closure back
to the closing position. Gently push on top of
the “U” shaped snap lock closure to make sure
it snaps into place.
5. Reattach the VELCRO
®
brand strap onto the
feed hose. Your debris bag is ready to be
reinstalled onto your cleaner.
6. Reconnect the debris bag to the vacuum tube.
Do not over turn.
Note:
It is easier to empty the debris bag
when it is dry. A second bag may be used
while the full debris bag is drying.
• If you have a lot of debris in your pool, especially after a storm, you can run your Kreepy
Krauly
®
Platinum
™
in two shorter cycles per day and empty the debris bag between cycles.
• It’s best to empty the debris bag when it becomes half full. The cleaner will have better
performance if the bag is not overloaded.
Push middle of
the bag inward
for closure
OPEN
CLOSE
CLEANER BAG
"U" SHAPED
SNAP LOCK
CLOSURE
OPEN
OPEN
REATTACH
STRAP ONTO
FEED HOSE
"U" SHAPED
SNAP LOCK
CLOSURE
Push down to
snap together
CLEANER BAG
OPEN
OPEN
REATTACH
STRAP ONTO
FEED HOSE