6
General Installation Information
WARNING
— Pumps improperly sized or installed or used in applications other than for
which the pump was intended can result in severe personal injury or death.
These risks may include but not be limited to electric shock, fire, flooding,
suction entrapment or severeinjury or property damage caused by a
structural failure of the pump or other system component
WARNING
— The pump can produce high levels of suction within the suction side of the
plumbing system. These high levels of suction can pose a risk if a person
comes within the close proximity of the suction openings. A person can
be seriously injured by this high level of vacuum or may become trapped
and drown. It is absolutely critical that the suction plumbing be installed in
accordance with the latest national and local codes for swimming pools.
WARNING
— In a domestic environment, this product may cause radio interference in
which case supplementary mitigation measures may be required.
WARNING
— Do not install on IT (insulated terra) mains network (marine applications)
NOTE
— If required by local building codes, the pump is to be supplied by an isolating
transformer or supplied through a residual current device (RCD) having a residual
operating current not exceeding 30 mA.
NOTE
— Use only RCD/GFCI suitable for protecting equipment with a DC current content in
the fault current.
• These instructions contain information for a variety of pump models and therefore
some instructions may not apply to a specific model. All models are intended for
use in swimming pool applications. The pump will function correctly only if it is
properly sized to the specific application and properly installed.
IMPORTANT SAFETY PRECAUTIONS
(continued)
General Warnings
• Never open the inside or the drive motor enclosure. There is a capacitor bank that
holds a 230 VAC charge even when there is no power to the unit.
• The IntelliFlo
®
VS pump is not submersible
• The IntelliFlo
®
VS pump is capable of 35 m
3
/hr or 35 meters of head; use caution
when installing and programming to limit pumps performance potential with old or
questionable equipment
• Code requirements for the electrical connection differ from state to state. Install
equipment in accordance with all applicable local codes and ordinances.
• Always Press the Stop button and disconnect the communication cable before
performing maintenance
English
Summary of Contents for INTELLIFLO VS-3050
Page 157: ......
Page 158: ...357219...
