5. Navigate to
ALARM SETUP
and access the sub-level menu to define the type and behavior of
the controller's optional alarms. See
Setting up the alarm setup parameters
6. Navigate to
FILE
and access the sub-level menu to upload or download system
configurations, or export stored data. See
.
Navigating the controller screens
About this task:
To move through the controller screens and edit a value or selection, complete the following steps:
1. Power on the controller. The
HOME
screen appears in approximately 2 seconds.
2. Press and hold
MENU/ESC
for 2 seconds to access the high-level status and setup start
screens. See the second row in Figure 8.
3. Press
DOWN
and
UP
to move through the high-level status and setup start screens.
4. Press
SET
to select a high-level status or setup start sceen.
5. Press
DOWN
and
UP
to move through the sub-level menu screens. The current value or
selection for each screen displays in the status field (values) or info fields (selections).
Note:
On setup screens you can edit the flashing value or selection. On status screens you
cannot edit the non-flashing value or selection.
6. To select a screen, press
SET
. Press
DOWN
and
UP
to select the value or selection that you
want.
7. Press
SET
to confirm your selection, or press
MENU/ESC
to exit without entering a value.
To exit a screen and return to a previous menu, press
MENU/ESC
.
19
MR5 Series Panel Mount Case Controller Technical Bulletin
Discontinued
