pellenc HELION 3 Operating Instructions Manual Download Page 33

Page: 33 / 36

ELECTRIC HEDGE TRIMMER HELION 3

54_161520-B

11.2. UK DECLARATION OF CONFORMITY : HELION 3

MANUFACTURER / ENTITY AUTHORIZED TO COMPILE

THE TECHNICAL FILE

PELLENC

ADDRESS

Quartier Notre-Dame - 84120 Pertuis (France)

We hereby declare that the machine referred to below as:

GENERIC DENOMINATION

ELECTRIC HEDGE-TRIMMER

FUNCTION

ELECTRIC BATTERY POWERED HEDGE-TRIMMER INTENDED FOR

TRIMMING BUSHES / HEDGES

COMMERCIAL NAME

HELION 3

TYPE

HELION 3

MODEL

HELION 3

SERIAL No.

54U00001 - 54U49999 54V00001 - 54V49999 54W00001 - 54W49999

Complies with the relevant provisions of the Supply of Machinery (Safety) Regulations 2008.

Complies with the following other directives and / or relevant provisions :

• Electromagnetic Compatibility Regulations 2016 ; the Restriction of the Use of Certain Hazardous Substances in

Electrical and Electronic Equipment Regulations 2012 ; 1907/2006 REACH Regulations ; the Waste Electrical

and Electronic Equipment Regulations 2013

The following harmonised european standards were used:

• BS EN 62841-1 : 2016 ; BS EN 62841-4-2 : 2017 ; BS EN 60529:1992+A2:2013 ; BS EN 55014-1 : 2017 ; BS

EN 55014-2 : 2015

Sound Power Level :

• Measured sound power level L

WAm

: 92 dB (A)

• Guaranteed sound power level L

WAg

: 93 dB (A)

The measured sound level and the guaranteed sound power level were measured by the body SGS-CSTC Shang-

hai, 588 Wast Jindu Road, Xinqiao, Songjiang, 201612 Shanghai, China according to a procedure compliant with

Directive 2000/14/EC Annex V. The report is identified by the following number : SHES210901802471.

SIGNED IN PERTUIS, DATED 24/06/2021
JEAN-MARC GIALIS
CEO

Summary of Contents for HELION 3





































Search results

Summary of Contents for HELION 3

Reviews:

Related manuals for HELION 3

Brands by name

Popular brands

pellenc HELION 3, Operating Instructions Manual

Search results

Summary of Contents for HELION 3

Reviews:

Related manuals for HELION 3

Brands by name

Popular brands