pellenc AIRION BP, Translation Original Manual

Page: 28 / 56

BACKPACK BLOWER AIRION BP
57_148610-A
Modification of the tool speed
1. Press the trigger until the desired power is obtained.
The pictogram flashes. As long as the pictogram is
flashing, the tool is waiting for an setpoint.
2. Once the desired power is obtained, maintain the
position of the trigger.
As soon as the setpoint is stable and saved, the
"Cruise-Control" pictogram no longer flashes.
3. Release the trigger.
Deactivation of "Cruise-Control"
1. Push the selector up or down either way.
The "Cruise-Control" mode is deactivated and the
tool returns to the last recorded speed.
5.5. SETTINGS VIA THE HMI MENU
5.5.1. NAVIGATE IN THE MENU
Accessing the menu:
1. To access the menu, press the POWER / MENU but-
ton (10) for 1 second (until "MENU" is fixed).
Note
If you take your finger off the POWER / MENU but-
ton (10) before the required time, the sequence is
interrupted.
Navigate in the menu:
1. To navigate between the different menu items, press
the POWER / MENU button (10) as many times as
necessary.
28