pellenc AIRION 3, Operating Instructions Manual

Page: 23 / 40

BLOWER AIRION 3
57 - 147010-C
6. Release the trigger (6) to stop the tool
Important
Make sure to maintain a sufficient distance (at least 30 cm) between the suction nozzle and any loose surface
material on the floor, wall, or ceiling, such as sand, gravel, liquids, etc. Such loose materials are likely to be
sucked in, pass through the intake screen, damage your equipment, and be ejected at high speed.
5.4. SPEED SELECTOR
Your tool is equipped with a speed selection system. This
system is used to optimize and vary the air flow power
using the selector (4) on the handle.
When the blower is turned on, the four indicator lights on
the handle (5) indicate the selected speed.
Selected speed speed 1 speed 2 speed 3 speed 4 Booster
Indicator light status
Power (W)
150 380 500 600 940
Battery life with the 1100 battery (mins) 395 160 120 100 63
Battery life with the 1200 battery (mins) 480 189 144 120 77
Battery life with the 1500 battery (mins) 600 235 180 150 95
Max airflow speed (m/s) * 33 47 52 55 63
Max airflow speed (m/s) ** 37 52 56 60 69
Max. airflow speed with accessories (m/s) *** 37 52 57 60 69
Max. airflow speed with accessories (m/s) **** 34 48 51 57 64
Actual flow rate (m3/h) * 490 690 760 815 920
Effective thrust (N) * 5 10 12 13.5 18
23