pellenc AIRION 3, Operating Instructions Manual

Page: 19 / 40

BLOWER AIRION 3
57 - 147010-C
2. Turn the quick connector a quarter turn to remove
the extension cord from the harness strap.
3. Unscrew the connector safety ring to release the ex-
tension cord.
4. Remove the battery from the harness (see battery
instructions).
4.7. CONNECTING PELLENC BATTERIES TO THE TOOL
Important
Always check the remaining battery-life before use. If necessary, recharge the battery using the charger.
To prolong the life of the connectors, it is advisable to protect them when they are disconnected. Avoid leaving
the connectors in contact with abrasive or dirty surfaces, or subjecting them to major impacts (falls).
For more information on PELLENC batteries, please refer to the battery instruction manuals.
19