Custom Rev A
Pelican Custom Premium WHWF 1865 / 2162
© 2012 Enviro Water Solutions, Inc.
3060 Performance Circle, Suite 2, DeLand, FL 32724
Page 6
www.pelicanwater.com
(877) 842-1635
Installation Overview
Figure 1
Note: The plumber should follow the stickers on the head.
Media Load
Note: Two people are recommended to complete these steps.
1. If the head is attached to the tank, unscrew it and set aside.
2. Inside the tank there will be a distributor tube. Place a piece of painter's tape on top of the
distributor tube to avoid media spilling into the tube.
3. Place the provided funnel securely in the tank and hold in place.
4. Load all of the provided media into the tank.
5. Clean the top of the tank and the threads, and remove the painter's tape.
6. Screw the head back to the tank, ensuring the upper basket attaches over the distributor tube.
IN
OUT
INLET
OUTLET
Outgoing
Water to
House
Incoming
Water
Supply
Water Filter
Wall
Wall
Customer-Provided
Connection
Bypass
(Recommended)
Unions
(Recommended)
Pelican
Water
Systems
