EN 13
ZERO ON
When the appliance is connected to mains power for the first
time, the display does not show anything yet. The appliance is in
standby mode.
1. Press the ZERO ON button.
A beep sounds and the display shows ‘: 0’. You can now use
the microwave.
▷
If the microwave is not used for 10 minutes, the appliance
will automatically return to standby mode. Then the display
shows nothing again.
Turning off and on
You can also put the microwave into standby mode after use by
holding the stop button down until nothing shows on the display
any more. Press the ZERO ON button again to make the microwave
ready for use again.
General
• If you want to set something, it is important that the display
shows the time (or ‘:0’) and not a selected function. If you
always press the stop button first, you can be sure that this is
the case.
• When the microwave is ready with the set function, you hear
three beeps and the display shows ‘END’. The microwave will
continue to give a beep every minute until the stop button is
pressed or the door is opened.
• When the function has finished, the fan will continue to run for
some time to cool down. The display will alternately show the
set time (or ‘:0’) and ‘COOL’.
• When you open the door, a running programme stops. This also
happens if you press the stop button. The fan will continue to
run. You can start the programme again by pressing the start
button.
• Do not use the microwave if it is empty.
• After the grill/oven/combi function has been used, you must let
the microwave cool down before you use it again.
OPERATION
Summary of Contents for PCM128RVS
Page 90: ...FR 32 ...
