ISSUED: 03-23-00 SHEET #: 170-9011-8 10-28-04
For customer service call 1-800-729-0307 or 708-865-8870.
1 of 13
Visit the Peerless Web Site at www.peerlessindustries.com
Installation and Assembly - TV Wall Mount
Read through instruction sheet and check to make sure you have all parts before beginning assembly and installation.
IMPORTANT! Turn to the appropriate page for your wall construction.
Models:
PM1327, PM1327S,
PM1327W
This product is UL Listed.
In the U.S.A. this product is intended
for use with UL Listed TVs only.
For installation to a wood stud wall, see page 3
For installation to a concrete, cinder block, or brick wall, see page 4
Please read this information first
TOOLS REQUIRED: Electric drill; Phillips head screwdriver or 3/8" socket; Socket wrench with 11/16" and 1/2" sockets,
plus a socket extender; level; stud finder (for wood stud wall installations).
If you are planning to include a Peerless VCR/DVD Mount as part of your TV installation, you will want to do that at the same
time you are assembling your TV Mount. Otherwise, you will have extra work to do later!
*Maximum Load Capacity:
100 lb
Do not force inner tube D into outer tube E as they may get jammed. A screw has been inserted to hold these tubes for
shipping purposes. Remove that screw and use parts L and T as noted on page 5 for final assembly.
R
• Installer must verify that the wall will safely support four times the combined weight of all attached equipment and
hardware.
WARNING
