PEERLESS PE 1120 Installation And Assembly Manual Download Page 2

2 of 7

ISSUED: 07-11-06  SHEET #: 055-9462-1

Note:

 Read entire instruction sheet before you start installation and assembly.

For customer care call (800) 729-0307 or (708) 865-8870.

Applications:

Suspended Ceiling.......................................................................................................................................... page 4

Extension Column ........................................................................................................................................... page 5

Flush Mount ..................................................................................................................................................... page 6

IMPORTANT!  Turn to the appropriate page for your ceiling installation.

• Do not begin to install your Peerless product until you have read and understood the instructions and warnings

contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please
call Peerless customer care at 1-800-729-0307.

• This product should only be installed by a qualified professional.
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached hard-

ware and components.

• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding

power.

WARNING

Tools Needed for Assembly

open-end 8 mm wrench

open-end 1/2" wrench

Summary of Contents for PE 1120








Reviews: