Peerless Pump 2BT11 Repair Instructions Download Page 1

REPAIR INSTRUCTIONS 
 

TYPE BT PUMPS 

 

Read this entire bulletin 

before attempting to repair this pump. For installation 
and operation refer to instruction bulletin 2880549. 
Properly installed, your Peerless pump will give you 
satisfactory, dependable service. We urge you to 
carefully read these detailed instructions to properly 
repair your pump. 
 
Failure to read and comply with installation and 
operating instructions will void the responsibility of the 
manufacturer and may also result in bodily injury as well 
as property damage. 
 
 
 
 
 
 
 
 
New equipment manufactured by Seller is warranted to 
be free from defects in material and workmanship under 
normal use and service for a period of one year from 
date of shipment;  Seller’s obligation under this warranty 
being limited to repairing or replacing at its option any 
part found to its satisfaction to be so defective provided 
that such part is, upon request, returned to Seller’s 
factory from which it was shipped, transportation 
prepaid.  This warranty does not cover parts damaged 
by decomposition from chemical action or wear caused 
by abrasive materials, not does it cover damage 
resulting from misuse, accident, neglect, or from 
improper operation, maintenance, installation, 
modification or adjustment.  This warranty does not 
cover parts repaired outside the Seller’s factory without 
prior written approval.  Seller makes no warranty as to 
starting equipment, electrical apparatus or other material 
not of its manufacture, since the same are usually 
covered by warranties of the respective manufacturers 
thereof. 
 
 
 
 
 
 
 
 
 
 
 
 
                                 

Peerless Pump Company 

                                

 Indianapolis IN, 46207-7026 

 

 
This bulletin is intended to be a permanent part of your 
pump installation and should be preserved in a 
convenient location for ready reference. If these 
instructions should become soiled, obtain a new copy 
from Peerless Pump Company. Include pump model 
and/or serial number with your request. 
 
Many models have suffix letters in the model number. 
When ordering repair parts, provide the complete model 
number including suffix letters and the pump serial 
number which are stamped on the pump nameplate. 
 
 
 
 
 
 
 
 

WARRANTY 

In   the   event,    notwithstanding    the   terms    of    this 
agreement, it is determined by a court of competent 
jurisdiction that an express warranty has been given by 
Seller to Purchaser with respect to the head, capacity or 
other like performance characteristics of said equipment, 
Seller’s liability for breach of the same shall be limited to 
accepting return of such equipment F.O.B. plant of 
manufacture, refunding any amount paid theron by 
Purchaser (less depreciation at the rate of 15% per year 
if Purchaser has used the equipment for more than thirty 
(30) days) and canceling any balance still owing on the 
equipment. 
 
 

THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY 
OTHER WARRANTIES, EXPRESSED OR IMPLIED, 
AND SELLER SPECIFICALLY DISCLAIMS ANY 
IMPLIED WARRANTY OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

4853854 

Summary of Contents for 2BT11









Reviews: