Pedigo P-2147, Operator'S Manual

Page: 8 / 60

S
AFETY
Combination Blanket/Fluid Warmer
▪
Operator’s Manual
▪
M N-39930
▪
Rev 2
▪
4/20
8
Safety Precautions
Before you begin Read and understand all instructions in this manual.
Electrical precautions Obey these electrical precautions when using the warmer:
▪
Connect the warmer to a properly grounded outlet. Do not use the warmer if it is
not properly grounded. Consult an electrician if there is any doubt that the outlet
used is properly grounded.
▪
Keep the cord away from hot surfaces.
▪
Do not attempt to service the warmer or its cord and plug, when plugged in.
▪ Do not operate the warmer if it has a damaged cord or plug.
▪
Do not immerse the cord or plug in water.
▪
Do not let the cord hang over the edge of a table or counter.
▪
Do not use an extension cord.
Usage precautions Obey these usage precautions when using the warmer:
▪
Only use this warmer for its intended use of warming medical solution bags,
bottles, and/or blankets. Follow facility and solution manufacturer guidance
regarding warming temperature for any item to be placed in the warmer.
▪ Do not use this warmer for warming blood or blood products.
▪
Do not cover or block any of the openings of this warmer.
▪ Do not use this warmer in a wet location.
▪
Only clean the warmer when the power cord is unplugged.
▪
Do not use corrosive chemicals when cleaning the warmer.
▪
Do not use the warmer cavity for storage.
▪ Do not remove exterior panels from the warmer or attempt repairs. The warmer
has no user-serviceable internal components. Only perform routine cleaning and
maintenance procedures specifically described in this manual. Inspection and
servicing of internal components must only be performed by qualified service
personnel.
▪
Only a qualified Pedigo service representative may make modifications to the
warmer. Modifications to the warmer could be hazardous to users and patients.
Operator training All personnel using the warmer must have proper operator training. Before
using the warmer:
▪ Read and understand the operating instructions contained in all the
documentation delivered with the warmer.
▪
Know the location and proper use of all controls.
▪
Keep this manual and all supplied instructions, diagrams, schematics, parts lists,
notices, and labels with the warmer if the warmer is sold or moved to another
location.