Peavey Vypyr VIP 1, Operating Manual, Page: 41 / 388

41
Effects Encoder
Instruments VIP 1 VIP 2 VIP 3
Acoustic 1 X X X
Acoustic 2 X X
12 string X X
7 string X X
Resonator X X
Sitar X X
EVIO X X
Synth X X
Bari X X
Bass X X X
Stompboxes VIP 1 VIP 2 VIP 3
TSC X X X
Fuzz X X
Comp X X X
Slap X
Wah X X X
Phaser X X X
Flanger X X X
Synth X X X
Slice X X X
Env Filter X
Pitch shifter X
Chorus X X X
Octaver X
Rotary X
MOG X
Tremolo X
Reverse X
Uvb X X X
Ring Mod X X X
Vibrato X
Boost X X X
Effects VIP 1 VIP 2 VIP 3
Tremolo X X
Octaver X X
Phaser X X
Rot. Spkr X X
Reverse X X
Pitch Shft X X
mog X X
Flanger X X
Comp bst X X
Env. Filter X X
Chorus X X
mOG: An effect of our own creation. MOG stands for monophoni c Octave Generator. Basically we
generate a signal one octave above the signal you are playing and another one octave below. This effect
is not intended for use with chords, so try it with single notes at first. This effect is on the inst/stomp
encoder on the VIP 1. P1 Octave up level, P2 Octave down level
FLaNGEr : Unlike the Analog Flanger model on the Stompbox encoder, this flanger uses a longer delay
line. Essentially this causes the flanger to emphasise lower frequencies. Parameter Adjustments: P1
Speed, P2 Depth
COmp bSt: Works in a similar fashion as Comp. However, the Comp BST compresses the dynamic range
after the amp model but before the tone controls. P1: Sensitivity, P2: Level
ENV FILtEr: Short for Envelope Filter, this effect is similar to Auto-Wah. The main difference is in the
parameter adjustment. With the Env Filter we allow you access to the “Q” (Width of the frequency band
filtered) which allows you to stray far from the sound of an Auto-Wah. This effect is on the inst/stomp
encoder on the VIP 1. P1 Sensitivity (Threshold), P2 Intensity (Q)
CHOruS: Similar to the Analog Chorus on the Stompbox encoder but with a longer delay line. What does
that mean? Well it means this effect will allow you to create a “Wetter” signal than you would normally
find on a stompbox chorus pedal. In fact at it’s most intense setting you can clearly hear a doubling effect
on the signal. P1 Speed, P2 Depth
LOOpEr: (not on an encoder wheel, this function will require a Sanpera I or Sanpera II foot controller).
Waste no time in making that purchase, the looper will allow you hours and hours of fun. You can record
any 30 plus seconds of anything, switch your tone (Preset) and play over top of that.
NOtE: the LED that corresponds to the looper on the encoder will turn on when recording or playing
back the loop.