MM
™
-8802 User Manual
Page 14
http://aa.peavey.com copyright 2001 All Rights Reserved
Audio Inputs
The MM-8802 includes functionality that supports a new modular input
architecture. This architecture provides the ability to configure the MM-
8802’s analog inputs for either microphone or line-level operation. Two
internal module bays provide connection to factory installed input modules.
These modules consist of the MM-Line 4, which provides four analog line
level inputs and the MM-Mic 4, which provides four analog microphone
level inputs. A total of two modules are installed at the factory on the MM-
8802. Which modules are installed is up to you!
MM-Line 4
The MM-Line 4 input card includes four line level inputs and installs into
slot 1 or slot 2 of the MM-8802 input section. The MM-Line 4 includes full
software control of input sensitivity and analog gain. It is possible to install
one or two MM-Line 4 modules into the MM-8802.
MM-Mic 4
The MM-Mic 4 input card includes four mic or line level inputs and installs
into slot 1 or slot 2 of the MM-8802 input section. The MM-Mic 4 features
studio grade microphone preamplifiers, complete with software controllable
phantom power and gain controls for each channel. It is possible to install
one or two MM-Mic 4 modules into the MM-8802.
With these new modules, the MM-8802 can be configured in a variety of dif-
ferent ways.
•
8 line inputs, 8 line outputs
•
8 mic inputs, 8 line outputs
•
4 mic inputs, 4 line inputs, 8 line outputs
By making the inputs modular, the MM-8802 provides even greater flexibili-
ty and makes for much more cost-effective system design.