Pearpoint Flexitrax P550c, Operation Manual

Page: 93 / 285

P550c Operation Manual
5 System setup
www.pearpoint.com | 93
5 System setup
When you power on the controller for the first time, you must carry out various setup tasks. Make sure
you complete these tasks before you start any pipeline surveys.
5.1 Insert the fuse
A 5A 32V MINI blade fuse is supplied separately
with the controller. You must insert the fuse
before powering on the controller for the first
time.
Open the cover of the auxiliary connection panel
and insert the fuse into the fuse holder. Then
close the cover.
Warning! You must remove the fuse to
isolate the battery when the controller is
transported by air!
Fig. 5.1: Fuse holder ( 1 )
in auxiliary connection panel.
1