Pearpoint Flexitrax P550c, Operation Manual

Page: 156 / 285

P550c Operation Manual
6 Operating the system
www.pearpoint.com | 156
Attach the crank handle to the crank socket located in the gear on the top right-hand corner of the
compartment using the supplied socket head screws.
Caution: Remove the crank handle and replace the side panel before reconnecting power to the system.
Steering (P356 crawler only)
The P356 crawler will steer left and right, allowing you to navigate pipes with ease. The crawler steers by
changing the speed on the left or right motors.
You can steer the crawler when it is moving or when it is stationary. Steering whilst reversing is possible
in manual driving mode only.
Note: Steering whilst moving is proportional to the crawler speed: the faster the crawler moves the
bigger the steer.
Manual mode provides a tighter turn than AUTO mode.
When the crawler is stationary, it will turn on its own axis. Be careful as the cable can get jammed
around the wheels.