PLIN-LWL – User Manual
7
2.2
Optical Waveguides (OWG)
Figure 3: Casing side with OWG connectors, voltage socket, and LEDs
A PLIN-LWL module has two standardized ST connectors for the
optical waveguides. The connections are separately in charge of
sending and receiving light signals.
Both optical waveguides of the duplex line are marked with colors
at each connector (red/black). For both modules, connect the OWG
output of one module with the OWG input of the other.
Optical wave guide
(marker)
Connector at
1
st
PLIN-LWL module
Connector at
2
nd
PLIN-LWL module
Red
OWG IN (gray)
OWG OUT (light gray)
Black
OWG OUT (light gray)
OWG IN (gray)