PCAN-MiniDisplay – User Manual
9
2.1
J1 External Buttons
3 push buttons can be connected and used to navigate through the
menus of the PCAN-MiniDisplay user interface. This is for mainte-
nance and debugging purposes. For example, a user of the PCAN-
MiniDisplay can be enabled to do communication configuration
changes or CAN tracing.
Figure 2: Pin assignment J1 external
Buttons
Pin
Function
1 Din1:
Down
2 Din2:
Up
3 Din3:
Enter
4 GND
The 3 push buttons connect each function pin (1 to 3) to GND.
2.2
J2 System
Power supply
2 High-speed CAN channels (CAN1 and CAN2)
1 digital output, 1 digital input, 2 analog inputs
Figure 3: Pin assignment J2 System
Pin
Function
1
Vb (7 - 30 V DC)
2 GND
3 Dout1
4 Din4
5 Ain1
6 Ain2
7 CAN2_L
8 CAN2_H
9 CAN1_L
10 CAN1_H