PCAN-Diag 2 – CAN Traffic
51
Menu item
CAN Data
>
Play Back Trace
(from firmware 1.5.0)
The PCAN-Diag can play back CAN messages from a binary trace
file (
*.btr
) onto the connected CAN bus. The timing of the CAN
messages, as it occurred originally during recording of the trace file,
is maintained.
Note:
When invoking the function and during the playback of
the trace file, the transmission of CAN messages from transmit
lists is suspended.
Do the following to play back a trace file:
1.
When invoking the function, the playback type is set to a
single pass of the trace file (selection
PlayOnce
). In order to
set up a continuous playback of the trace file with repetition,
click on the field to switch to
Infinite
.
2.
Make sure that no USB connection is present between the
PCAN-Diag and a PC.
3.
Click on
SelectFile
and select the trace file (
*.btr
) for
playback from the list.
The playback starts directly after selecting the file.
4.
Click on
Pause playback
to do so. Now you have the
following options:
Function
Executed action
Exit
Ends the playback
Restart
Restarts the playback from the beginning of the trace
file
Continue
Continues the playback from the point where the
interruption occurred before
Summary of Contents for IPEH-002069-V2
Page 1: ...PCAN Diag 2 Handheld Device for CAN Bus Diagnostics User Manual V2 3 1 ...
Page 6: ...PCAN Diag 2 User Manual 6 11 4 PCAN Diag Files on the Internal Memory Card 93 ...
Page 43: ...PCAN Diag 2 CAN Traffic 43 Data display after assigning the symbol file in the PCAN Diag ...
Page 98: ...PCAN Diag 2 Appendix 98 ...